Hi, Is it possible to use the C5402 DSK to debug an external C5402 via JTAG? I have an application that can't be fully tested on...

Hi, Is it possible to use the C5402 DSK to debug an external C5402 via JTAG? I have an application that can't be fully tested on the DSK so I need to be able to debug a 'c5402 running on another board. Thanks, Les

Dear group I have a custom C5402 board interfaced to a M29W010B Flash module from STMicro. The boards works fine with the...

Dear group I have a custom C5402 board interfaced to a M29W010B Flash module from STMicro. The boards works fine with the 100MHz C5402. It boots from flash and I program the flash with my own routine. I have built a few boards with the 160 MHz C5402. I get comms through

Hi all, I am trying to boot a c5402 with 8 bit serial. I have looked over the doc's on the c5402 and would like to know if...

Hi all, I am trying to boot a c5402 with 8 bit serial. I have looked over the doc's on the c5402 and would like to know if there is a 1 bit delay between data sent to c5402 bootloader mode and the BCLKR1 clk. ^--------- Frame ^^^^^^^^^^ bclkr1 __xxxxxxxx Dat

Does anyone have the improved C5402 GEL file for the C5402 DSK. The TI site suppose to have it at it's ftp.ti.com site, but it is...

Does anyone have the improved C5402 GEL file for the C5402 DSK. The TI site suppose to have it at it's ftp.ti.com site, but it is not there anymore. Thanks Maurizio Gencarelli Royal Australian Air Force Australia

Hi everyone, I'm looking to buy 2 C5402 DSK boards for my current project. They are needed to be delivered in 1 week. Price is...

Hi everyone, I'm looking to buy 2 C5402 DSK boards for my current project. They are needed to be delivered in 1 week. Price is negotiable. I'm living in Melbourne, Victoria, Australia. If anyone want to sell the C5402 DSK boards pls let me know. Helps will be much appreciated.

-----Ursprungliche Nachricht----- Von: Yi Li [SMTP:] Gesendet am: Montag, 9. August 1999 18:46 An: c54x Betreff: [c54x]...

-----Ursprungliche Nachricht----- Von: Yi Li [SMTP:] Gesendet am: Montag, 9. August 1999 18:46 An: c54x Betreff: [c54x] C5402's clock mode Hi! all, A 10Mhz external crystal is used to enable the internal oscillator of C5402, in order to l

Hi! I use a 10Mhz oscillator as the external clock to C5402 (according to the bug report of C5402 v1.0, I have scaled the...

Hi! I use a 10Mhz oscillator as the external clock to C5402 (according to the bug report of C5402 v1.0, I have scaled the voltage of external clock to 2.0v), the hardware pins CLKMD[3,2,1] are set to be "1,0,0" so that the PLL multiplier should be 10, and the reset v

Hi! all, I am now designing a board with C5402, BGA package. I want to find some adapter that can convert C5402 from BGA...

Hi! all, I am now designing a board with C5402, BGA package. I want to find some adapter that can convert C5402 from BGA package to TQFP (PGE) packge, could anybody give me some information about this? or any information about BGA socket (for C5402). T

Could someone me understand how the C5402 dsk board works, and give me an indication how to use the dsplib files. I have tried...

Could someone me understand how the C5402 dsk board works, and give me an indication how to use the dsplib files. I have tried searching for the dsplib for the C5402, but only find the files for the 549. I have assume, naively, that the dsplib is the same as that necessary for the C5

Hi to all.  I'm working in a project using a DSP C5402 and a CPLD Cypress CY37256, identical of the DSK C5402, but i don't have the...

Hi to all.  I'm working in a project using a DSP C5402 and a CPLD Cypress CY37256, identical of the DSK C5402, but i don't have the configuration file of the CPLD to program it.  Is there anyboby who can help me to give this information, or somebody who knows where i can find something to re

Hi, all, Got a c5402 HPI timing question: I am trying to interface to HPI at 100MHz bit/s data rate(12.5MHz byte/s). I...

Hi, all, Got a c5402 HPI timing question: I am trying to interface to HPI at 100MHz bit/s data rate(12.5MHz byte/s). I am acting as a host ONLY SENDING data to HPI. The control signals used are HBIL/HRDY/HDS1/R_W/HCNTL0_1. From the c5402 spec(page 63, SPRS0

hello, how do we interface a c5402 dsk with another c5402? thanks marlo __________________________________________________ ...

hello, how do we interface a c5402 dsk with another c5402? thanks marlo __________________________________________________

Hi, If am looking for a used C5402/C62xx DSP Starter kit, if anyone is interested in selling please send me an email. ...

Hi, If am looking for a used C5402/C62xx DSP Starter kit, if anyone is interested in selling please send me an email. Regards, Subramanian.

I want to use RTDX to monitor various registers in assembly code on my C5402 DSK. Does anyone have an example of this, showing the ...

I want to use RTDX to monitor various registers in assembly code on my C5402 DSK. Does anyone have an example of this, showing the setting up of the input and output channels, reading data from the C5402 etc ? Most application notes I have come across, have examples where the u

Hi, We are considering a C5402 DSK in the development of one of our projects, if anyone has any experience of the following...

Hi, We are considering a C5402 DSK in the development of one of our projects, if anyone has any experience of the following could they please help ? 1 - Is it possible to use the DSK with a JTAG for s/w development, i.e. a non-intrusive way of downloading/executing and

Dear all I have started on the design of a stand alone board with a C5402. I have been using the DSK up to now. Three aspects...

Dear all I have started on the design of a stand alone board with a C5402. I have been using the DSK up to now. Three aspects that I dont have clarity on: 1. The program for the DSP should be loaded from flash memomy. How does the onboard boot loader work? 2. How will I

Hi, Can anybody point me to some resources that would help me use the on board flash on a C5402 in an effective way. ...

Hi, Can anybody point me to some resources that would help me use the on board flash on a C5402 in an effective way. Regards, Vinayak

hello there, does anybody have any good complete code examples of how to use the peripheral interrupts (ie int0) on the C5402 with...

hello there, does anybody have any good complete code examples of how to use the peripheral interrupts (ie int0) on the C5402 with CCS (any imlementation). Im a newie to DSP applications (uni project) and i really need some help, the ti documentation never gives complete exampl

Hello, I tried to connect C5402 DSK to a win XP PC but I couldn't make it work. Is there anyone who has the same experience?...

Hello, I tried to connect C5402 DSK to a win XP PC but I couldn't make it work. Is there anyone who has the same experience? How can I solve this problem? thanks, Lily

I am a new C5402 DSK board user. Now , I want to use the RS232 interface on C5402 DSK board ,but I do not know how to start. ...

I am a new C5402 DSK board user. Now , I want to use the RS232 interface on C5402 DSK board ,but I do not know how to start. Could anyone give me some suggestion or experience (Have documents or sample codes I could get?) THANKS!!!!!!!!!!!!!!!!!