DSPRelated.com

Wulf Doering (@wulf)


Re: Polar SSB Modulation

Reply posted 2 weeks ago (07/06/2026)
...

Re: Polar SSB Modulation

Reply posted 3 weeks ago (06/28/2026)
Due to Detlef _A hint, the phase and amplitude are perfectly aligned, which resulted in an improvement.I don’t understand why the amplitude should have a wider...

Re: Polar SSB Modulation

Reply posted 3 weeks ago (06/28/2026)
Your assessment motivates me to keep looking for the catch in polar modulation using an NCO.So far, it’s just a simulation; there are neither amplifiers nor nonlinearities....

Re: Polar SSB Modulation

Reply posted 3 weeks ago (06/28/2026)
I’ve also tried my hand at correction algorithms and had similar experiences: every adjustment to the phase worsened the result.By unwrapping the atan2 before...

Re: Polar SSB Modulation

Reply posted 3 weeks ago (06/26/2026)
The videos demonstrate very good, distortion-free audio quality. It seems you've largely solved the phase calculation problem.But what do you mean by “manual intervention”?...

Re: Polar SSB Modulation

Reply posted 3 weeks ago (06/26/2026)
There are very few documented transceivers that use polar modulation. One of them is the uSDX project.https://github.com/threeme3/usdxUnfortunately, the SSB signal...

Re: Polar SSB Modulation

Reply posted 3 weeks ago (06/26/2026)
Thanks for the tip. In addition to slightly better phase correction at the -pi/+pi discontinuity of arctan2(), I optimized the timing between phase and magnitude....

Re: Polar SSB Modulation

Reply posted 3 weeks ago (06/26/2026)
For the simulation, I used two different test signals: first, the opening announcement from a TV news program, band-limited to 200 Hz–2700 Hz; and second, a two-tone...

Polar SSB Modulation

New thread started 4 weeks ago
#Octave #SDRVery minimalist QRP amateur radio transceivers, such as the uSDX and QMX, use a polar approach for SSB modulation.However, after demodulation with synchronous...

Use this form to contact wulf

Before you can contact a member of the *Related Sites:

  • You must be logged in (register here)
  • You must confirm you email address