DSPRelated.com

Achilles Kappis (@ZaellixA)

I have a BEng. degree in Music Technology & Acoustics Engineering and an M.Sc. in Sound & Music Technologies I have been working as a sound engineer (P.A. and Studio) and sound system engineer and designer for the last 8 years. I am very well interested in Digital Signal Processing (Audio related mostly), Acoustics (Electroacoustics, Computational Acoustics, Wavefields, Array Processing) and Sound Computing (NOT Music Computing).

Re: Computing the delay from a room response FIR filter

Reply posted 5 years ago (05/05/2020)
Hello plan_buzz. In general, when one wants to get the impulse response (IR) of a system (at least true for an LTI, but not only that) could use various methods...

Re: Setting 25KHz playback sampling rate in sound card

Reply posted 5 years ago (03/25/2020)
Hello there,Most probably your sound-card does not support "arbitrary" sampling rates. This would either require the use of variable timing clocks (hardware, but...

Re: Inverse FFT of a Sampled Frequency Domain Function

Reply posted 5 years ago (01/30/2020)
Like drmike said you first of all have to see how Julia implements the routine to make sure you can "compensate" for the magnitude "inconsistencies" (first of all...

Re: FFT of a sine wave signal

Reply posted 5 years ago (10/20/2019)
Well, first of all bertramaerts is right about this part. Similar to what you do in the second subplot, in the third subplot you should plot only (the first) half...

Re: Problems extracting phase of dual FFT

Reply posted 5 years ago (07/03/2019)
Hey there Samp17, I am not sure I do understand what the problem might be but I would suggest a couple of "tests" to acquire a better understanding. By delaying...

Re: Possible Bug - Need your Help

Reply posted 5 years ago (06/04/2019)
Tested when logged in. It works fine.Not tested when logged out.EDIT: Just tested while logged out and works like a charm :).Thanks for the fix. Keep up the good...

Re: Possible Bug - Need your Help

Reply posted 5 years ago (06/04/2019)
My test results:1) Correctly redirected to the blogs when NOT logged in.2) Redirected to https://www.dsprelated.com/blogs.php but it is blank indeed when logged...

Re: minimum phase HRTF reconstruction

Reply posted 6 years ago (05/20/2019)
Hey there,I haven't really delved into the abyss of HRTF-related 3D audio, so I am not sure I can be of too much help but I'll do my best to work it out with you.Regarding...

Re: Somewhat Off Topic: Manipulating a PDF File.

Reply posted 6 years ago (05/15/2019)
Hey there Rick,First of all thanks (in advance) for sharing the paper :).So, the most obvious way to do so is to use Acrobat Professional.Additionally as rrlagic...
Well, for your own convenience here is a plot from the code I quoted (apologies for not including labels and titles).Also, here's a nice link showing how overlap-save...
Hey there szak1592, I have to admit I haven't implemented your code and thus I cannot be 100% sure about the reasons it is not working the way it should. Nevertheless,...

Re: linear array beam pattern

Reply posted 6 years ago (04/09/2019)
Well, as for the first part (frequency domain implementation), I'll be honest to say that I am not aware of the method, so I cannot add any insight to that.Regarding...

Re: linear array beam pattern

Reply posted 6 years ago (04/08/2019)
Well, phase unwrapping is not beamforming-specific. It is just a way to interpret phase.For example, if you have two sensors that are lets say 3.5λ apart and you...

Re: linear array beam pattern

Reply posted 6 years ago (04/07/2019)
Hhhmmm, this seems "normal" to me. One subtle point I would like to make (one I had an issue when I was working with beamformers) is to make sure you implement the...

Re: linear array beam pattern

Reply posted 6 years ago (04/07/2019)
Hey Nauman,To be honest I am not an expert on the field, but I'll do my best.Based on the (somewhat limited) info you provide I will assume that your array is a...

Re: Auto Correlation in DSP processor

Reply posted 6 years ago (03/16/2019)
Hey there,I believe that @weetabixharry has quite a good reason to point you to some more alternatives than going directly to an Micro-Processor-Unit(MPU)/Micro-Controller-Unit(MCU)...

Re: Overlap-add with window

Reply posted 6 years ago (01/11/2019)
Well, to my understanding, the third step CAN be filtering (I can't think of some property against that statement).In case you would like to implement FIR filtering...

Re: Overlap-add with window

Reply posted 6 years ago (01/10/2019)
Hey there,Well, to be honest I am not very familiar with the Modified Discrete Cosine Transform but in the link you provided I could find this quotedNote that windows...

Re: Overlap-add with window

Reply posted 6 years ago (01/09/2019)
Hey @ctlee,Up to the point you have implemented everything is alright (I assume the fft function pads with zeros if the length of the asked transform is longer than...
Hey nbtech,I am definitely not an expert on the field but what the person who wrote the article actually means is that when phi_1 = 0 and phi_2 = 0, then both the...

Use this form to contact ZaellixA

Before you can contact a member of the *Related Sites:

  • You must be logged in (register here)
  • You must confirm you email address