Hi all!
I'm working with the DSK6713 and CodeComposer V2.20.
On the DSK6713 folder I found the POST example and the Flashburn Routines for 8
bit-booting. For my Customer-Application I need a 16 bit bootloader. So I
decided to modify the source code. But I do not point exactly how. Can you help
me?
Regards
Thomas
16 bit Bootloader for DSK6713
Started by ●July 18, 2005
Reply by ●July 18, 20052005-07-18
Hello Thomas,
The boot code for 16 bit vs. 8 bit should be the same except for the EMIF
initialization [and the hardware boot mode]. Once the EMIF is initialized
correctly, the hardware will take care of the FLASH memory accesses [byte, word,
and half word] for you.
mikedunn
n...@elster.com wrote:
n...@elster.com wrote:
Hi all!
I'm working with the DSK6713 and CodeComposer V2.20.
On the DSK6713 folder I found the POST example and the Flashburn Routines for 8 bit-booting. For my Customer-Application I need a 16 bit bootloader. So I decided to modify the source code. But I do not point exactly how. Can you help me?
Regards
Thomas
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to:
c...@yahoogroups.com
<*
