DSPRelated.com
Forums

playing audio out of dsk6711 through ad535

Started by suni...@tataelxsi.co.in April 3, 2005

Hi everybody,
I have a simple question. I am using the DSK6711 which has an AD535 on board. The AD535 has the sampling frequency limited to 8 Khz. Does this also mean that i will be unable to play out audio through the ad535 at a higher frequency, or is it just that the input analog signal will be sampled only at 8 Khz?

Thanks and regards

-Sunil




Sunil:

It looks like the AD535 is, actually was since it's now considered obsolete,
a Voice Codec. The data sheet suggests that it can go up to input/output
rate of 11.025 kHz (might be constrained to 8 kHz on the 6711 DSK), so I
think you're limited to just voice handling.

I <believe> TI has a PCM3003 audio codec daughtercard, which has much larger
range - that would probably be the best avenue - unless someone has any
other ideas.

HTH,
g. ----- Original Message -----
From: <sunilks@suni...>
To: <c6x@c6x@...>
Sent: Sunday, April 03, 2005 10:47 AM
Subject: [c6x] playing audio out of dsk6711 through ad535 >
>
> Hi everybody,
> I have a simple question. I am using the DSK6711 which has an AD535 on
board. The AD535 has the sampling frequency limited to 8 Khz. Does this also
mean that i will be unable to play out audio through the ad535 at a higher
frequency, or is it just that the input analog signal will be sampled only
at 8 Khz?
>
> Thanks and regards
>
> -Sunil >
>




hi,
AD535 has a fixed sampling rate of 8khz.
Even if u pass audio through it, u will be able to get only frequencies between 0 to 4 khz.
And i guess there is a antialiasing filter there so if a analog signal more than 4khz. is passed it won't get aliased.
regards
seenu

s...@tataelxsi.co.in wrote:


Hi everybody,
I have a simple question. I am using the DSK6711 which has an AD535 on board. The AD535 has the sampling frequency limited to 8 Khz. Does this also mean that i will be unable to play out audio through the ad535 at a higher frequency, or is it just that the input analog signal will be sampled only at 8 Khz?

Thanks and regards

-Sunil

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/c6x/

<*> To unsubscribe from this group, send an email to:
c...@yahoogroups.com

<*

Yahoo! India Matrimony: Find your life partner online.

hi,
just a suggestion, if u r looking out for using a DSK for an audio application , u can go for TMS320C6713 DSK.
Which has got a PCM3XXX series codec in it and can support multiple sampling rates.
regards
seenu

George Wicks <g...@sbcglobal.net> wrote:


Sunil:

It looks like the AD535 is, actually was since it's now considered obsolete,
a Voice Codec. The data sheet suggests that it can go up to input/output
rate of 11.025 kHz (might be constrained to 8 kHz on the 6711 DSK), so I
think you're limited to just voice handling.

I TI has a PCM3003 audio codec daughtercard, which has much larger
range - that would probably be the best avenue - unless someone has any
other ideas.

HTH,
g.----- Original Message -----
From:
To:
Sent: Sunday, April 03, 2005 10:47 AM
Subject: [c6x] playing audio out of dsk6711 through ad535>
>
> Hi everybody,
> I have a simple question. I am using the DSK6711 which has an AD535 on
board. The AD535 has the sampling frequency limited to 8 Khz. Does this also
mean that i will be unable to play out audio through the ad535 at a higher
frequency, or is it just that the input analog signal will be sampled only
at 8 Khz?
>
> Thanks and regards
>
> -Sunil
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/c6x/

<*> To unsubscribe from this group, send an email to:
c...@yahoogroups.com

<*

Yahoo! India Matrimony: Find your life partner online.