|
We want to use a DSP to process quickly the digital images. The images have been grabbed into PC from a CCD camera of 3k x 2k pixels at 18 frames per second. Could the TMS320C6713 DSP Starter Kit finish our work? How to transfer the image data into the TMS320C6713 board? By USB? Thanks. |
|
|
How to transfer the image data into the TMS320C6713 board? By USB?
Started by ●November 11, 2004
Reply by ●November 13, 20042004-11-13
|
yangmeng0618,
Unfortunately the 6713 DSK has no high speed I/O. You could perhaps
use the DSK to 'finish your work', if you could get the images to the
board.
The USB connection is only routed to the JTAG port and is not sufficient to
provide the bandwidth needed for realtime processing of images.
Some questions come to my mind...
Do you need to process the images in realtime??
What type of processing do you need to peform on the images??
A DM642 EVM would probably be a good choice for your task.
mikedunn
yangmeng0618 <y...@yahoo.com> wrote: We want to use a DSP to process quickly the digital images. The |
|
|
Reply by ●November 13, 20042004-11-13
|
Yes these are the relevant questions to ask and answer. If you do not need hard real-time, If it is not hard real-time, then you could get by with a fast Pentium class CPU. It is important to consider all the processing requirements of your application, what is it you are trying to achieve, and then pick a processing solution based on that.
Regds JS
-----Original
Message-----
yangmeng0618,
Unfortunately the 6713 DSK has no high speed I/O. You could perhaps use the DSK to 'finish your work', if you could get the images to the board.
The USB connection is only routed to the JTAG port and is not sufficient to provide the bandwidth needed for realtime processing of images.
Some questions come to my mind... Do you need to process the images in realtime?? What type of processing do you need to peform on the images??
A DM642 EVM would probably be a good choice for your task.
mikedunn
|
