Hi
We have TMS320TCI6488 Mezanine ACM EVM board.
How to load image through ethernet ?
Any configuration setting file or docs on EMAC booting?.
Raviraj
_____________________________________
TMS320TCI6488 ACM EVM board booting from EMAC/ethernet
Started by ●March 3, 2009
Reply by ●March 3, 20092009-03-03
check out this for more on EMAC booting
http://focus.ti.com/lit/ug/spruea7b/spruea7b.pdf
On Tue, Mar 3, 2009 at 5:30 PM, Raviraj B Patil <
r...@tataelxsi.co.in> wrote:
> Hi
> We have TMS320TCI6488 Mezanine ACM EVM board.
> How to load image through ethernet ?
> Any configuration setting file or docs on EMAC booting?.
>
> Raviraj
>
>
>
http://focus.ti.com/lit/ug/spruea7b/spruea7b.pdf
On Tue, Mar 3, 2009 at 5:30 PM, Raviraj B Patil <
r...@tataelxsi.co.in> wrote:
> Hi
> We have TMS320TCI6488 Mezanine ACM EVM board.
> How to load image through ethernet ?
> Any configuration setting file or docs on EMAC booting?.
>
> Raviraj
>
>
>
Reply by ●March 4, 20092009-03-04
Hi
>We have TMS320TCI6488 Mezanine ACM EVM board.
>How to load image through ethernet ?
>Any configuration setting file or docs on EMAC booting?.
>
>Raviraj
>
>_____________________________________
Thanks,
I gone through the pdf.
I did not understand how to Create the Combined (Boot parameter tabel, boot table & boot configuration table ) EMAC Image, if we have .out file.
Do we need to use TI CCS for creating combined EMAC image ?.
Or any methods, pl. share if any doc for the same.
Thanks
Raviraj
_____________________________________
>We have TMS320TCI6488 Mezanine ACM EVM board.
>How to load image through ethernet ?
>Any configuration setting file or docs on EMAC booting?.
>
>Raviraj
>
>_____________________________________
Thanks,
I gone through the pdf.
I did not understand how to Create the Combined (Boot parameter tabel, boot table & boot configuration table ) EMAC Image, if we have .out file.
Do we need to use TI CCS for creating combined EMAC image ?.
Or any methods, pl. share if any doc for the same.
Thanks
Raviraj
_____________________________________
Reply by ●March 4, 20092009-03-04
Hi
Thanks for right link.
I gone through the pdf.
I did not understand how to Create the Combined (Boot parameter tabel, boot table & boot configuration table ) EMAC Image, if we have .out file.
Do we need to use TI CCS for creating combined EMAC image ?.
Or any methods, pl. share if any doc for the same.
Thanks
Raviraj
----- Original Message -----
From: jai kumar
To: Raviraj B Patil
Cc: a...@yahoo.com ; c...
Sent: Tuesday, March 03, 2009 9:49 PM
Subject: Re: [c6x] TMS320TCI6488 ACM EVM board booting from EMAC/ethernet
check out this for more on EMAC booting
http://focus.ti.com/lit/ug/spruea7b/spruea7b.pdf
On Tue, Mar 3, 2009 at 5:30 PM, Raviraj B Patil wrote:
Hi
We have TMS320TCI6488 Mezanine ACM EVM board.
How to load image through ethernet ?
Any configuration setting file or docs on EMAC booting?.
Raviraj
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.
Thanks for right link.
I gone through the pdf.
I did not understand how to Create the Combined (Boot parameter tabel, boot table & boot configuration table ) EMAC Image, if we have .out file.
Do we need to use TI CCS for creating combined EMAC image ?.
Or any methods, pl. share if any doc for the same.
Thanks
Raviraj
----- Original Message -----
From: jai kumar
To: Raviraj B Patil
Cc: a...@yahoo.com ; c...
Sent: Tuesday, March 03, 2009 9:49 PM
Subject: Re: [c6x] TMS320TCI6488 ACM EVM board booting from EMAC/ethernet
check out this for more on EMAC booting
http://focus.ti.com/lit/ug/spruea7b/spruea7b.pdf
On Tue, Mar 3, 2009 at 5:30 PM, Raviraj B Patil wrote:
Hi
We have TMS320TCI6488 Mezanine ACM EVM board.
How to load image through ethernet ?
Any configuration setting file or docs on EMAC booting?.
Raviraj
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.