|
Hi All, I am getting this problem as shown in the subject line. I am using flexds emulator on my hardware setup. In my setup eight 5510 DSPs of silicon ver 1.2 are tied to single JTAG port. All the JTAG test of xdsprobe are passed . But on trying to start the CCS using target emulator this problem comes. In the TI erratica they descibes a workaraound of adding BYPASS. But that is for the 5510 silicon version 2.0. Here In my case the processors in my board are of version 1.2. Kindly do let me know if some body face similar problem. Are the latest emulator can work on any of the silicon version of the 5510. May it be 1.2 or 2.0 ... Regards, Gagan |
|
|
"Can't Initialize Target CPU Target Initialization Failed. Check target power, &
Started by ●April 23, 2003
Reply by ●April 23, 20032003-04-23
|
Maybe the DSPs are held in reset and the DSPs need to be brought out of reset for CCS to initialize. -Albert gagan2172 wrote: > > Hi All, > I am getting this problem as shown in the subject line. > I am using flexds emulator on my hardware setup. In my setup eight > 5510 DSPs of silicon ver 1.2 are tied to single JTAG port. All the > JTAG test of xdsprobe are passed . But on trying to start the CCS > using target emulator this problem comes. In the TI erratica they > descibes a workaraound of adding BYPASS. But that is for the 5510 > silicon version 2.0. Here In my case the processors in my board are > of version 1.2. > Kindly do let me know if some body face > similar problem. Are the latest emulator can work on any of the > silicon version of the 5510. May it be 1.2 or 2.0 ... > > Regards, > Gagan > > Yahoo! Groups Sponsor > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the > author of this message will receive your answer. You need to do a > "reply all" if you want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c55x > > Other Groups: http://www.dsprelated.com |
