|
I am trying to integrate the code described in the application note
SPRA661A ("implementing a Software UART on the TMS320C54x with te McBSP and DMA") with a DSP/BIOS application. I would like to know if anybody has done it or can give me some references. Thanks, Jacob |
|
|
Software UART in the C54x
Started by ●February 4, 2004
Reply by ●February 5, 20042004-02-05
|
Jacob, We have implemented the software uart on several other TI DSKs, but not the 5402 DSK. Which DSK are you using? I can probably offer you some help once I know what hardware you are using. Tony ----- Original Message ----- From: "Jacob Fainguelernt" <> To: <> Sent: Wednesday, February 04, 2004 2:02 PM Subject: [c54x] Software UART in the C54x > I am trying to integrate the code described in the application note SPRA661A ("implementing > a Software UART on the TMS320C54x with te McBSP and DMA") with a DSP/BIOS application. I > would like to know if anybody has done it or can give me some references. > Thanks, > > Jacob > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c54x > > Other Groups: http://www.dsprelated.com |
