Gregor- > I'm a freshman on this forum. I used yahoogroups to reply to your message > and I expected it will appear on the forum. It seems...

Gregor- > I'm a freshman on this forum. I used yahoogroups to reply to your message > and I expected it will appear on the forum. It seems it's not like that. > Anyway, thank you, I solved the problem already. Your message is probably delayed a couple of days since you are a new member and the forum is moderated. How did you solve the problem between CSL versions? What did you change?

Gregor- > I tried to change it and to recompile CSL6713.lib but it didn't help. > But you gave me a good hint - I'll check whether...

Gregor- > I tried to change it and to recompile CSL6713.lib but it didn't help. > But you gave me a good hint - I'll check whether interrupts and EDMA > are enabled. Also, as you are dealing with a fairly old version of CCS, I suggest to search for this issue on on dsprelated.com and Google groups. -Jeff PS. Please *always* cc the group. If people ask me for advice privately my co

I am having a problem with a program running and having interrupts get disabled. The hardware I'm using has a sequence of thigns happening that...

I am having a problem with a program running and having interrupts get disabled. The hardware I'm using has a sequence of thigns happening that are fired off by timer interrupts and then by EDMA completion interrupts, and then I also have a UART handler runnign related to interrupts. Intermittently the processor stops sending all interrupts, and when I halt the processor in the debugger, ...

hi to all, i'm working on DSK6713 .i need to generate 9600 buad(RS232 link) from mcbsp.i could able to make link at 115200 buad . can u all...

hi to all, i'm working on DSK6713 .i need to generate 9600 buad(RS232 link) from mcbsp.i could able to make link at 115200 buad . can u all sudjest. -- thanxs and regards, Hardik Mewada baroda. 09328255982

Hi guys, I am having some trouble of missing some bits of data when I sent out data between two TI DSP processors using McBSP of...

Hi guys, I am having some trouble of missing some bits of data when I sent out data between two TI DSP processors using McBSP of one(DSP-I which is TMS 6711) to the UART of another(DSP-II which is TMS 6701). I have a setup in which I recieve digital data(somewhat sine wave-ish) though a serial port of a DSP-I, which is filtered there and also

Hi, this may be board related problem but i was clue less on this. needed help. I am using 6711, code running internally. CE0 space is ...

Hi, this may be board related problem but i was clue less on this. needed help. I am using 6711, code running internally. CE0 space is used for SDRAM, CE1 for Flash, CE2 for SRAM and CE3 with a 3to8 decoder for interfacing i/o. In i/o devices like UART, ADC are interfaced parallally, it inclueds some other leds and digital sensing inputs. And th

Can any one give me data sheet and schematics for windmill uart daughter card????.

Can any one give me data sheet and schematics for windmill uart daughter card????.

kami10001 wrote: > hi > > 1-can i directly transfer digital audio data from a .dat/wmv file to > McBSP or its necessary...

kami10001 wrote: > hi > > 1-can i directly transfer digital audio data from a .dat/wmv file to > McBSP or its necessary to use UART. > > 2-How to configure McBSP @ 44.1kHz and 48kHz for 16/32 bit rates? > > br >

Dear all   I need the schematics of this daughter card. Can anyone help me in this regard.   thanking you in...

Dear all   I need the schematics of this daughter card. Can anyone help me in this regard.   thanking you in anticipation

Jeff Brower wrote: > Gustl- > > >>>> I was talking about the example in spra633. IIRC DX is feed >>>> into DR and FSR. So...

Jeff Brower wrote: > Gustl- > > >>>> I was talking about the example in spra633. IIRC DX is feed >>>> into DR and FSR. So there is no external UART and therefore >>>> it's syncronous. >>> >>>

Jeff Brower wrote: > Bernhard- > > >>I was talking about the example in spra633. IIRC DX is feed into DR and >>FSR. So there...

Jeff Brower wrote: > Bernhard- > > >>I was talking about the example in spra633. IIRC DX is feed into DR and >>FSR. So there is no external UART and therefore it's syncronous. > > > Where is the clock line? It's not synchronous.

I am working with the c6712 and I am having problems with semaphores. We are using one of the McBSPs to implement a UART. Our code...

I am working with the c6712 and I am having problems with semaphores. We are using one of the McBSPs to implement a UART. Our code is based on the TI Sample code. In my transmit code I am trying to use a semaphore to block the task during the EDMA transfer: void SerialTransmit

Hello all I'm a grad student at UT, Arlington and have been working with the C6711 DSK for the past year. I have been reading...

Hello all I'm a grad student at UT, Arlington and have been working with the C6711 DSK for the past year. I have been reading up on McBSP based communication. I need some help with the EDMA part. I have read spra633a.pdf which talks about configuring the McBSP as a UART.

Hi, I'm working with the 6711 DSK and using DSP/BIOS. I'm trying to write code that receives on the McBSP (configured as a UART),...

Hi, I'm working with the 6711 DSK and using DSP/BIOS. I'm trying to write code that receives on the McBSP (configured as a UART), uses EDMA to transfer that data into the receive buffer, quickly processes the receive buffer in a HWI, and then triggers a SWI for further processi

Warning Long e-mail ahead!!   In Short:   Edma stalls seem to arise when using Ed

Warning Long e-mail ahead!!   In Short:   Edma stalls seem to arise when using Ed