56303 | 563xx | 5680 | 56805 | 5680x | 56F80 | 56F800DEMO | 56F805 | 56f807 | 56F830 | ADC | Bootloader | Codec | CodeWarrior | CW5 | CW6 | Debugger | DSP56303 | DSP56303EVM | DSP563xx | DSP5680 | DSP56800 | DSP56807 | DSP56858 | DSP56858EVM | DSP56F803 | DSP56F805 | DSP56F807 | DSP56F80x | DSP56F826 | DSP56F827 | DSP56F8xx | EVM | FFT | Flash_over_jtag | GPIO | Interrupt | Interrupts | JTAG | LCD | Linker | MCF5307 | Metrowerks | Modulus | MSCAN | PCMaster | PWM | Quad | Rif | RTOS | SDK | SPI

Newb: WTB: 56002 EVM

As the subject says, Looking for a 56002 EVM module for a 4th year design project. Anyone have one lying around collecting dust? Due to my small (student) budg...

Flash memory on the EVM DSP56311

How can I use the flash memory on the DSP56311 EVM module, i need to do an independent device from this EVM card, i'dl like to find out how can i program this flash...

EVM debugger

hi all.   I develop a small development system (D.S.) for the DSP56303PV100 and I want to know if there is any way to download a program to the D.S. through the...

EVM test file

Hello, My EVM56309 has a strange behaviour these last days. First, some memory cells are blank in the EVM software DATA window. Second, i get impredictable arithmetical resu...

DEMO56F8014 in stand alone operation   [2 Articles]

Hi, I'm trying to get the unit of the DEMO56F8014 EVM running in stand alone mode but I have had no success. Does anybody knows if the DEMO56F8014 EVM board can run in stand al...

DSP56002 EVM

Dear Motorola DSP Newsgroup, I am looking for an additional DSP56002 EVM board for a project. I understand these boards are no longer in production. Does a...

PC - DSP56303EVM interface

Hi, I was recently looking into setting up a serial interface between a PC and the EVM board, in order to transfer data generated by a PC application to the DS...

ADC fix for 56F805DSPEVM?

Hi, I have observed the ADC fix for 56F827 EVM board in the photos section of this group. Does anybody have a similar solution to the DSP56F805 EVM boa...

Change of address for ADRIO (EVM STDIO) information.

Esteemed and Illustrious DSP Group Members: Sorry if this is posted twice ... my e-mail is all fouled up ... Every once in awhile I still get direct requests ...

SSI interface to codec on 56F827 EVM board   [2 Articles]

Hi. I have 2 questions regarding using the I2S protocol with the SSI for the 827 EVM board. First, does anyone have any sample code for configuring and running the ...

MOTDSP: Anybody actually used Mot C compiler?

Illustrious DSP Group Members: Has anyone actually used the freebie Motorola C compiler that comes with the EVM kits to successfully implement a program on an EV...

DSP board   [2 Articles]

Hi people, I wanted to expand the external memory on the 563xx EVM boards, but it doesn't seem possible since the EVM boards don't have any memory expansion connec...

Codewarrior / 56F8346EVM program running/debugging

I have a demo project that compiles properly and I'm tring to run it on my evm board to see the light turn off and on and I'm having trouble connecting to it from C...

Re: file i/o

--- In , raghava unadi wrote: > dear all > any one please send me the example for file i/o application for > understanding purpose. how i have to...

How to make the application work without the help of debugger?   [2 Articles]

Hi everybody, I'm currently workin in development of a conrol system for BLDC motor using DSP56F805 processor. We're almost in the closing stage of the projec...

Output SPI commands from Timer Interrupt

Perhaps someone can give me some guidance here: On my 56F8346 EVM board I have an SPI D/A converter that requires 2 bytes sent out the SPI0 port to output a volt...

DSP56F801EVM: ADC interfacing   [2 Articles]

Folks, I want to test the ADC please advice, i'm using codewarrior with PE. Hardware Settings: Connecting GND of frequency generator to EVM kit's GND and positive i...

56002EVM EVMTEST.EXE

Question about the old 56002EVM module. I am looking for a quick way to test the majority of components in an older 56002EVM module. Performed the 60Hz Demo test...

[ DSP5685x ]

Does anyone have a working codec for this evm... or can help me write one that works with the Codewarrior 6.0 ...

EVM not working on parallel port   [2 Articles]

Hi! My DSP56311EVM is nicely working on my old desktop PC, P3 with win2k. I installed SUITE56 on the laptop (P4, winxp), and the board seems to be not detected. A...

Re: I still have the same problem with the Port A DSP56303   [3 Articles]

If you're working on the DSP56303 EVM (you didn't say) are you aware that the address and data bits are "scrambled" in the hardware connection to external memory? F...

TI EVM

Hi, May i know how connect the TI 6701EVM externally with Pentiuum PC? Is there any need external power supply.Thanking in advance. Tqgsa ...

Design assistance -- JTAG and VREFH   [3 Articles]

I need some help designing a new board using the 56F8323. In looking for the minimum configuration for JTAG debugging I would like to confirm that the JTAG pins ...

56F805 EVM

Does anybody gives me details of where will I get the DSP 56F805 module immediately.. Thanks, esubbu ...

EVM for 56801 - where to buy?   [2 Articles]

Hello, Subject says it all, where can I get one of these in germany? Would also consider 803/805/807 types, I just need 6ch ADC,SPI and some Flash. Thanks...

DSP56F805EVM rs232

The evaluation board has RTS connected to CTS. I am using an MSComm ActiveX control to talk to EVM. All is well. The production item will use SCI0, with RTS and CTS r...

ElectricalFeaturesEVM56858   [2 Articles]

Hi all, I´m develping an audio aplicattion using the DSP56858EVM, now I want to connect an amplifier at the line-in of the EVM to work with voice signals from a ...

RE: Matlab to Motorola conversion

Hi fellows, I have done a speech processing project using MATLAB. Is there any means of porting the code to MOTOROLA DSP56002 EVM ? Bye ...

DSP56805 EVM time out on SCI

Hi, I am operating the serial port in blocked mode and wonder if it is possible to set a timeout for this mode of operation? I would like the program to resume if...

AW: EVM for 56801 - where to buy?

Future has it 100%, I've heard that EBV distributes them as well. Georg Bende Softwareentwickler Abteilung Elektronik Dr. Fritz Faulhaber GmbH & Co KG Daim...

JTAG "Cannot connect to Board"   [3 Articles]

Hello all, Using CodeWarrior™ Development Studio for Motorola DSP56800 version 5.1 targeting the DSP56F805 chip and using Macraigor Wiggler for JTAG. I can download t...

Re: Using DSP56303EVM as JTAG debugger/programmer   [4 Articles]

You could do that, but it will be abysmally slow. BTW, the code for the HC705K1 on the EVM is available for the asking at Motorola's DSP tech support, so you can bu...

807 SCI1/GPIOD problems

I'm trying to setup SCI1 as a communications port (using the DSP56f807 EVM), but am running into difficulty with it. I have already setup SCI0 and verified it to be...

FIR FILTER for the Motorola DSP56F826EVM   [2 Articles]

Does anybody have (or know where to get) a FIR filter (audio filter) example for the DSP56F826EVM. I used to work with the DSP56002EVM but now i have this new ...

Re: DSP56303 gone wild (PLL configuration)

While the value for the PLL may theoretically be within the limits of the device, you have not accounted for the PCAP capacitor. The value of the capacitor on the...

MATLAB + Visual Studio support for Motorola EVM boards

Leonard- Signalogic DirectDSP software supports MATLAB and Visual Studio communication with EVM563xx boards using a parallel port interface (small hardware ada...

CCI error

Hello, We are new to the dsp 56858EVM we have been trying to load a code (not specific) to start working on the EVM but the problem we are facing is the eeror that accurs every...

DSP56858-VoIP   [4 Articles]

I just bought a Motorola 56858 EVM and along with it came the Codewarrior software. I'm trying to implement a VoIP system. However, i have not had any prior experie...

FW: GPIO problem   [2 Articles]

Dear Jac,                    I had posted my GPIO problem, but it seems that the moderator did not allow it to go on the group messages..What should I do? ...

Want to talk to Mr James M Momtgomery

Hi Does anyone know how to reach Mr. James M. Montgomery? I am interested in his article "Implementing a 10-Band Stereo Equalizer on DSP 56311 EVM Board". But ...