5409 | 5416 | AD5 | ADC | BIOS | Boot | Booting | Bootloader | C540 | C5402 | C5409 | C5416 | CCS | Codec | DMA | Dmad | DSK | DSKPlus | Dsplib | EVM | FFT | FIR | Flash | GPIO | HPI | Initialization | Interrupt | JTAG | LOG_printf | MCBSP | RFFT | RTDX | Sampling | STLM | UART | VC540

Hi,
1-As I know in SPI mode there is not the feature to program FPER in 
McBSP. I want to read 16-bit samples every 125us in SPI mode. (it is 
compulsory). I want to use DMA and not add any checking or time 
consuming code to my project.
2- If my cpu internal clk is 120 MHz and the CLKGDV field of my SRGR is 
8 bits, how can I use mcbsp(in SPI mode) with internal clk source and 
with 100KHz clk(r/x) frequency? It seems that the minimum achievable 
clk frequency is (120/(2*255))=235KHz. 
Regards

------------------------------------

OMAP35x EVM jump-starts low-power apps
------------------------------------
The modular and extensible OMAP35x Evaluation Module (EVM) enables developers to start building
applications based on the OMAP35x architecture:http://www.DSPRelated.com/omap35x

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )