5409 | 5416 | AD5 | ADC | BIOS | Boot | Booting | Bootloader | C540 | C5402 | C5409 | C5416 | CCS | Codec | DMA | Dmad | DSK | DSKPlus | Dsplib | EVM | FFT | FIR | Flash | GPIO | HPI | Initialization | Interrupt | JTAG | LOG_printf | MCBSP | RFFT | RTDX | Sampling | STLM | UART | VC540

Hi there,

Anyone know how to integrate the DIP switches with the HPI pins ? Is it possible to control the
HPI using the DIP switches ? Thanks.

Regards,
Dayah
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution
for Commercial & Consumer End Equipment: www.ti.com/dm6467

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )

Dayah-

> Anyone know how to integrate the DIP switches with the HPI pins ? Is it
> possible to control the HPI using the DIP switches ? Thanks.

First, I answered several of your questions about using HPI in GPIO mode, so I'm
wondering did you get it to work?  You didn't follow up on those answers as would be
expected in a professional engineering dialog.

Second, which DIP switches?  Do you mean the ones included on the DSK 5416 board?  Or
do you mean external switches, such as ones you would connect to the HPI connector
(P3) on the DSK board?

-Jeff
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video Transcoding Solution
for Commercial & Consumer End Equipment: www.ti.com/dm6467

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )

Dayah-
> Yes, my HPI pins are working. I also had setted the HPI pins control using the DIP
> switches on board. thanks.

Ok that's great.  Keep going.

-Jeff

PS. I suggest that you post to the group, so your fellow students working on similar
projects can see you've had some success.  Who knows, they might ask you a question!

> Jeff Brower <j...@signalogic.com> wrote:
>
>      Dayah-
>
>      > Anyone know how to integrate the DIP switches with the HPI pins ? Is it
>
>      > possible to control the HPI using the DIP switches ? Thanks.
>
>      First, I answered several of your questions about using HPI in GPIO mode,
>      so I'm
>      wondering did you get it to work? You didn't follow up on those answers
>      as would be
>      expected in a professional engineering dialog.
>
>      Second, which DIP switches? Do you mean the ones included on the DSK 5416
>      board? Or
>      do you mean external switches, such as ones you would connect to the HPI
>      connector
>      (P3) on the DSK board?
>
>      -Jeff
>

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )

Dayah-
> I still have problem to change my program from using the delay() to sleep(). Do you
> know how to write the sleep() in CCS ? I see an example use TSK_sleep. I tried it
> but also got error. Thanks.

Please post to the group, not to me.  I cannot help unless you post to the group.

-Jeff
> Jeff Brower <j...@signalogic.com> wrote:
>
>      Dayah-
>     > Yes, my HPI pins are working. I also had setted the HPI pins control
>     > using the DIP switches on board. thanks.
>      Ok that's great.  Keep going.-JeffPS. I suggest that you post to the
>      group, so your fellow students working on similar projects can see you've
>      had some success.  Who knows, they might ask you a question!
>
>     > Jeff Brower <j...@signalogic.com> wrote:
>     >
>     >      Dayah-> Anyone know how to integrate the DIP switches with
>     >      the HPI pins ? Is it
>     >      > possible to control the HPI using the DIP switches ?
>     >      Thanks.First, I answered several of your questions about
>     >      using HPI in GPIO mode, so I'm
>     >      wondering did you get it to work? You didn't follow up on
>     >      those answers as would be
>     >      expected in a professional engineering dialog.Second, which
>     >      DIP switches? Do you mean the ones included on the DSK 5416
>     >      board? Or
>     >      do you mean external switches, such as ones you would connect
>     >      to the HPI connector
>     >      (P3) on the DSK board?-Jeff
>     >

(You need to be a member of c54x -- send a blank email to c54x-subscribe@yahoogroups.com )