Adaptive Filter | ADPCM | ADSP | ADSP-2181 | Aliasing | AMR | Anti-Aliasing | ARMA | Autocorrelation | AutoCovariance | Beamforming | Bessel | Blackfin | Butterworth | C6713 | CCS | Chebyshev | CIC Filter | Circular Convolution | Code Composer Studio | Comb Filter | Compression | Convolution | Cross Correlation | DCT | Decimation | Deconvolution | Demodulation | DM642 | DSP Boards | DSP/BIOS | DTMF | Echo Cancellation | Equalization | Equalizer | ETSI | EZLITE (Ez-kit Lite) | FFT | FFTW | FIR Filter | Fixed Point | FSK | G.711 | G.723 | G.729 | Gaussian Noise | Goertzel | GPIO | Hilbert Transform | IFFT | IIR Filter | Interpolation | Invariance | JTAG | Kalman | Laplace Transform | Levinson | LPC | McBSP | MIPS | Modulation | MPEG | Multirate | Notch Filter | Nyquist | OFDM | Oversampling | Pink Noise | Pitch | PLL | Polyphase | QAM | QDMA | Quantization | Quantizer | Radar | Random Noise | Reed Solomon | Remez | Resampling | RTDX | Sampling | Sharc | TI C6711 | Undersampling | Viterbi | Wavelets | White Noise | Wiener Filter | Windowing | XDS510PP | Z Transform

Looking for DSP board

Hi, I'm looking for a DSP board with following requirements: - Texas Instruments processor - Resource board for media, not only signal board - At least four E1/T1 ports - Possibility to load own software Surf would be good, but there is only two E1/T1, Signalogic has not E1/T1 at all and ...

TMS320F206 Software

Hi I am a student, and I have an old TMS320F206 board with the software. This was bought originally from White Mountain, though the software site now redirects to TI. The board connects to the PC via serial port. I was wondering if anyone can tell me where I can get the latest software fo...

testing a blackfin DSP board

Hi guys, I'm testing a blackfin DSP board and wanted to get the opinion of you guys on what the best way to ensure that everything works on the board. I've desigined a blackfin dsp board and having it sent to fabricate. I plan to assemble it myself. How would you go about testing that the b...

Signatec ?

I am considering using Signatec boards for my project, specifically the PMP1000 dsp processing board, the PDA14 digitizer board and the PDAC4000 signal generator. Does anyone have any experience using these board? How would you rate them? ...

Trimedia board

hello everyone, about the trimedia board, does anyone knows what the board really is? i mean is it a different type of hardware platform for image/video processing. IMHO, there are dsp, fpga and ASIC. so where do we put the trimedia? ...

single board vs multiple board

which is cheaper (cost involved in both fabrication and testing) a single board with 9 DSP's or 3 boards with 3 DSP's each with proper sockets to communicate. amar ...

Audio Connection for BF 537 EZkit lite board

Hello Everyone, I am developing an Audio application project on ADSP Bf537 EZ-LITE board. I have developed compression and decompression algorithms for the Audio samples. The algorithm is working fine and I have tested it. Now I want to achieve live recording and output the ...

Kalman Filter

I'm looking for a processor board that has build in A/D (3 channels) and 3 outputs for an inertial nav system. It will have a kalman filter on board (maybe 9 states at least but I will implement the steady- state Kalman filter no Ricatti equations). Also fixed gains for state feedback control. I...

Build my own DSP dev board?

Hi, I'm a recent engineering grad who did 3 courses in DSP but never used an actualy dsp board (all our labs were in Matlab). Does anyone have schematics for a TI or analog devices DSP development board. Or do you know of companies that sell discontinued boards? Thanks ...

sharkfin from analog

hi i was looking for sharkfin processors but i am confused, does the sharkfin processor comes with a board on which it is already installed and the whole module can run independent of a pc? or the sharkfin processors listed by analog devices are only processors and i would have to purchase ...

Q: op-amp to protect DSP board?

Hello, I recently got an ADUC831 microconverter board, and am interested in experimenting with DSP applied to an audio input and/or output. A friend who is knowledgeable about these boards recommended "passing audio input through an op-amp to protect the board." His meaning appears to be th...

Looking for ~100MSs 2 channels DAQ board, 70MHz IF, ...

Hi, I'm looking for a DAQ (digitizing board) on PCI, with 2 (or 4) channels. The sampling rate should be around 100 MS/s max with a least 50 MHz bandpass. The board shall have tens to hundreds of Mb of RAM to acquire a few seconds of signal in one shot. Then download to a PC for further p...

Motorola Audio EVM Board with DSP56371 Daughter Board for sale

Hi all, is there anyone who need an 56371 EVM Board for Audio DSP? The Board is originally Motorola. There are 6 x Stereo output (chinch) 2 x Mic input (3.5mm jack plug) 1 x Headphone (3.5mm jack plug) 4 x S/PDIF output el. (chinch) 2 x S/PDIF input el. (chinch) 1 x S/PDIF output opt. (Tosh...

Communicating with C54CST board without JTAG emulation?

Hi, I have a TI C54CST eval board and I do not have any JTAG emulators. I just wanted to know if there was a way to communicate with the board via the COM port on my PC. Is having a JTAG emulator the only way to do this? Thanks - Vamsi This message was sent using the Comp.DSP web in...

TMS320C6416 DSK with CCS 3.1?

Hi! For playing with DSPs at home I have a 6416DSK board, with the pseudo JTAG emulation via USB and CCS 2.2 what came with the board. Now I wanted to connect the board in the office, where we use CCS 3.x, but I could not find a way to make this work via USB, only with the real JTAG blackh...

Will Bittware Board supports DMA Transfer from Host

Hi, I am working with Bitware's Hammehead Lite PCI Board in which I have to transfer data to/fro Board and PC.I am using Diag21k 7.31 utility tools(HIL Library fns) to interact with Board.I am trying to transfer data b/w PC and board using DMAs.While Intialising DMA i am calling the following func...

Re: DSP evaluation board

Regardez chez Analog Devices du côté des Blackfin Amities JP F5MI http://perso.orange.fr/F5mi.64 "shaders" a écrit dans le message de news: 1188498824.864956.326870@x40g2000prg.googlegroups.com... > Hello, > > Sorry for my english, i'm french... > > I am newbie with the pro...

3in1 DSP CPLD MCU Demonstration Board ti altera atmel

Hello everyone, I'd like to learn how to program a TI DSP and came across the following board on eBay for a 3 in 1 combo containing the TI TMS320VC5402: http://item.express.ebay.com/ws/eBayISAPI.dll?ExpressItem&item=290191396087&FROM_MERCHANDIZING=1QQssPageNameZKP_Merch_CLOSED_ITEM_SIMILAR_LI...

GAO EVM 2812 Evaluation Board

Hi guys, I'm planning on buying TMS320 F2812 DSP Board from www.gaoengineering.com and was wondering if anyone has ever used it or similar board before..? You can find the product description and other documents at http://www.gaoengineering.com/index.php?main_page=product_info&products_id=84 ...

GAO EVM 2812 Evaluation Board

Hi guys, I'm planning on buying TMS320 F2812 DSP Board from www.gaoengineering.com and was wondering if anyone has ever used it or similar board before..? You can find the product description and other documents at http://www.gaoengineering.com/index.php?main_page=product_info&products_id=84 ...

GPS board + DSP board

Hi, I am new to electrical engineering, but have experience in C++ application development I need your advice. I need a DSP board with serial interface and Compact flash slot. I want to run on DPS processor the application which would read data sent by GPS receiver to DSP board's serial ...

BF533-EZLITE Board Dimensions

I've bought the BF533-EZLITE Evaluation Board from Analog Devices. For a doughtercard design as well as mechanical integration I would like to have mechanical dimensions (location of the high density connectors and the mounting holes) for this board ( not available on AD's homepage :-( ) Chr...

Sonitech Dual C40 VMEbus-based board

Hi, Does anyone have the software/documentation/drivers for this board???? Thanks, Ram ...

signal gen

hi understand it is possible to get software programs for your pc that will allow you input sinewaves into board and then take analogue output from board back into pc for evaluation? ...

Use EzDSP board as emulator?

Hi: I have recently begun using an EzDSP board from Spectrum Digital for the TMS320F2812. On the board is a FPGA implementing an embedded JTAG emulation port, which talks to the PC via a parallel printer port. I am thinking it is possible to use this board as a JTAG emulator for a TMS32...

Re: anybody has a ADS8364EVM to sell?

Fabrizio Santini wrote: > Hello everybody, > > I'm looking for a functioning ADS8364EVM board to plug into our C671x > system. > Does Anybody know where I can buy it, or have it preowned/refurbished? I > already tried at TI, but the company declared this board obsolete, and > reseller...

DSP development board with fast A/D

I am looking for a DSP development board for a bench-top project. I want to use an Analog Devices Sharc or equivalent TI processor. My input signal of interest is a LFM waveform with a 30MHz bandwidth (Lets assume it is at baseband for now). So, I would like to find a development board with dual A/D...

Help getting from eval kit to debugable prototype board.

Hi, I need to get a prototype DSP board up and running ASAP and was looking at the TI320LF2406 and the Motorola 56F803. Based somewhat on price and GPIO pinouts I selected the TI part and got the eZDSP system kit thinking (incorrectly it appears) that I could develop and then move a design to...

Recommendation for PCI DSP board?

Hello, For a laoboratory measurement control / data acquisition system I'd like to use a DSP board that plugs into a standard PC. A nice, low-cost card that fits the bill is this one: http://www.signalogic.com/index.pl?page=pc32 However, it only comes with an ISA slot. All PCI cards that ...

[newbie] how to build DSP prototype board

Hi all, Suppose I've got well working algorithm (IIR filter) developed in Code Composer Studio along with DSP Starter Kit, say C5510. I've got a built COFF file (*.out) that loads into DSP through DSK and works there like a charm. Now what. I want to have that code to work on a standalone prot...

ADSP-BF533 Can't boot anymore!

Hello, I have a ADSP-BF533 STAMP Board. At first I downloaded a compressed Kernel image to the board via HyperTeminal. Then I accidentally erased the flash bank 1. After that I copied a uClinux Kernel to address 0x20100000. I run the kernel (at U-BOOT > run linuxrun) and everything worked fin...

Re: Multiprocessor project

> Thanks for the advice. > > I will try this. > > I wondered if it would be more appropraite to have a project group for a > multiprocessor project? > > Cheers, > Paul. > As far as I know, the Visual DSP simulator cannot be used for simulating multiprocessor projects. (EE-148 says...

Low power consumption board with memory

Hi, I'm an italian student of Automation Engineering (..sorry for my academic english...). It's the first time that I post in this group. I would like to know if there is some fpga board (I've just used an Altera board for an exam of Electronic Digital Systems) that has this requirements: -...

[HELP] BF533 with SDRAM booting problem

Dear all: I've a BF533 board with 16M SDRAM on it, the silicon version of BF533 is 0.2, booting is by a 16bit flash. Every thing works fine when HPICE is connected, but if VisualDSP++ is closed and press reset, the program boot into an errant state, the LEDs flashs normally, but the wavefor...

Finding the right DSP evaluation board

Hi everyone, I am looking for a floating point evaluation board that has easy audio inputs (such as rca or 3.5mm jacks) and a SAR adc. I have almost exactly what I want in the ADSP BF533 but I am getting a group delay due to the sigma-delta converter. Some of you on here let me know that I ...

board protection

do you guys have any suggestions on how to make a protection circuit for the tms320f2812 ezdsp board so it would be robust when input signals are applied? thank you :) ...

Re: Low Standby Current DSP

Steve4DSP wrote: ... > Altough, i could see no ADC, or DAC in the datasheet? The development board has a codec. I think it's mono, like the one on the 'C31 board. Jerry -- Engineering is the art of making what you want from things you can get. ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯...

Help needed with TI C6711 DSK

Hi everyone, I am looking for a trick to output 6 (binary) signals simultaneously from the C6711 DSK board to feed a RF circuit. To retrieve these signals from the board I would like to avoid any external module (daughter card or home made circuits) because we have a limited budget for a smal...

ADSP21992eval looses connect to Visual DSP

Hi there, I do have some problems with my ADSP 21992 EVAL-Board. The board runs fine as long as I communicate via the USB Interface with the board. If there is a 10 minute break in the USB communcation (just writeing code under Visual DSP++ 3.0) without using the board - VisualDSP loose th...

Anyone in India interested in selling 2nd hand DSP boards?

Hello All, In India it takes 7 weeks to procure new DSP boards as the retailers do not stock them and it comes via Singapore channel. Add to it overhead of 75%, in form of duty and retailer margin. I am looking for Blackfin BF561 and TMDSEVM642 for purchasing. ...