AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Cross-talk in PCM3003   [2 Articles]

I am working with a DSK6711 and a PCM3003 to develop an acoustic echo canceler. I have develop a loopback program and it seems to work fine, but if I amplify the ou...

Using PCM3003 daughtercard and c6711DSK   [2 Articles]

Greetings all, I've been trying to use the PCM3003 daughtercard (a.k.a. TMDX326040A) with the 6711DSK, but have bumped into a problem here. Maybe you folks could...

Default sampling rate PCM3003

Hi... I was just wandering if the default sample rate of the PCM3003 is 44khz, or do you have to setup an interrupt to ensure that it really is a fixed 44khz? thanks! ...

c6x_daq.dll ??

hi all is any one using the c6x_daq.dll and the pcm3003.out file to directly interface the TMS320C6711 DSK and matlab.?? i need some help with sending the s...

Inizializate PCM3003

hi all, My name is Miguel I need to contact somebody because I am trying to put in practice an Active Noise Control with a 6711 dsk and PCM3003 Audio Dauhther Card of Texas ...

Re: PCM3003 doubt

Iago F B- I don't have any experience with the PCM3003 daughtercard. If you cannot see DSP/BIOS config options that specifically mention PCM3003, then it'...

PCM3003 audio card

Hi, I'm desesperate! I need a sample of how to configure a DSP/BIOS file to be able to use an audio daugther card PCM3003. I need to read two datas from the ...

Re: Audio daughter card sampling frequency

--- melaniesaayman <> wrote: > I want to know how I can change the sampling > frequency of the audio > daughter card. Specifically I want to change it to > 44.1...

PCM3003 - no stereo output   [3 Articles]

Hello group, I am using the C6711 DSK with the PCM3003 daughter card. Ever since I changed operating systems (win98--->winXP), my PCM3003 doesn't seem to want ...

sampling frequency in PCM3003   [2 Articles]

Hi all,   Has someone ever used a sampling frequency in PCM3003 different from 24kHz or 48kHz?  I mean, how can I provide the PCM3003 with a clock from the DSK?...

Pb with PCM3003   [3 Articles]

Hello, I use the C6711DSK and the PCM3003 audiocard. I want to do a FIR filter with a sampling frequency=48 Khz. I use an hardware interrupt each time the seri...

Problems and Questions with PCM3003   [6 Articles]

Hi, I am currently working with the C6711 DSK and the PCM3003 Daughter Card. I am using Chassaing's Code "loop_intr_pcm" located on his book "DSP Applications ...

PCM3003 sample rate

Hello, I use the PCM3003 audio daughter card with the C6711 DSK board. I want to use a different sample frequency than 24KHz or 48KHz provide by the audio card...

Using PCM3003 to perform Sound localization   [8 Articles]

Dear, I am currently do some testing in sound localization, but now i got one problem.........still can not be solve......:( The ALgorithm located on his bo...

Does AnyOne Know This Error? I am Using C6711 With PCM3003..   [4 Articles]

Hi, Does AnyOne Know How to Sovle This Error? I am Using C6711 With PCM3003. Is't the problem due to the setting of cmd file or option? ....... >> error...

Audio I/O with PCM3003 and DSP/BIOS

Hi, I'm using a TMS320C6711 DSP with a PCM3003 Audio Daughter card. Can anybody explain me how to configure the DSP/BIOS (for RTDX usage) on a program that use...

Loopback with C6711 DSK and PCM3003 (McBSP1 + EDMA)

Hi, group.   I have seen that many of you have worked with C6711 DSK and PCM3003.  I am also working with them, trying to develop a loopback program wh...

Re: Audio Input output using 6711 DSK & Daughter audio card   [2 Articles]

Matt- Back in 2000-2003 I programmed the C6711 DSK many times, but I never used the PCM3003 daughtercard. From what I can tell by listening to other developers, the basic app...

programing   [2 Articles]

hi is any one using the c6711dsk with the pcm3003 daughter card?? im trying to program it using the new matlab -simulink block set. and how do i access the two da...

Re: Playing PCM audio samples

--- melaniesaayman <> wrote: > I am using the 6711 DSK to do mp3 decoding. > I want to know how to play the PCM samples. you mean you get mp3 data from your PC...

Double buffer with stereo output..

Hi there. Where can I find a code example which implement double-buffer with stereo output via the PCM3003 daughter card? Thanks in advanced, Moti. ...

Re: Can EMIF be used with a D/A??

Hi David, Those parts you have called out interface to the C6711 through the serial port. Using the EMIF would not be the prefered way. You could memory map so...

6711DSK and the audio daughtercard   [2 Articles]

Hi all, 1) The example code accompanying the PCM3003 daughtercard uses codec polling instead of EDMA or interrupt-driven processing. Do you know of any way to ...

jumper setting   [2 Articles]

Hi ! I have PCM3003 daughter card. When I was trying to get 32bit rate , I lost my samples, I set jumper 11 and 12 pin 3-4 , default settings is jumper 11 pin ...

[Fwd: Re: Using PCM3003 to perform Sound localization]

Ng- Yes, I think the maximum cross-correlation value is what you want. That should get you delay between mics. You can also estimate relative amplitude to conf...

PCM3002 Daughter Card Interface to 6711 - Dr. Rulph Chassaing's example codes   [2 Articles]

Hi All, Thanx for loads of information on Daughter Card (PCM3003). I have gone through the code given in Dr. Rulph Chassaing's book(implemented by W.J. Gomes ...

RTDX COM object problem

Hi! I am using CCS 2.10 version for my aplication with 6711 dsk and pcm3003. I am trying to exchange data between RTDX and Matlab by using COM object interface...

Help please

Dear all, I'm desperately trying to configure an EDMA transfer between my DSK (TMS320C6711) and the audio codec PCM3003. As you must have guessed I'm a novic...

HWI and PRD   [2 Articles]

Hi ! C6x , I have been trying to send frame of processed data periodically to Matlab by using RTDX. Here are some problems I couldn't figure out. I am using 67...

Error Message from CCS V2.0 C6711 with PCM3003

Hi, Does Anyone know what happen to this error code? I am using C6711 with PCM3003 and the error message from CCS V2.0. >> error: relocation value truncated at...

Re: using 2 mike input from the daughter board using 6711

> I am new to 6711 board. I need to read 2 input using > dsk6711/daughter board. If i am using 1 input from > onboard mike and one from daughter board i am not > ...

Scheduling   [2 Articles]

Hi C6x, I am using TI6711 DSP with PCM3003 daughter card. And I have used herdware interrupt for interface with input and output signal samples. The program ru...

Do you know 'loop_intr_pcm' sample from R.Chassaing?

Hi! As i posted in my previous message, i'm programing a TMS320C6711 dsp with an audio PCM3003 card. My program is similar to 'loop_intr_pcm' sample, who is in...

Re: Adaptive Noise Cancellation using the RLS algorithm.

Hi Cynthia, My name is Miguel Cotanilla and I am currently studying Telecommunications Engineering at a Spanish University. I have the same problem of you, I am trying to put...

Re: playing audio out of dsk6711 through ad535   [2 Articles]

Sunil: It looks like the AD535 is, actually was since it's now considered obsolete, a Voice Codec. The data sheet suggests that it can go up to input/output rate of ...

RTDX poll

Hi, I have a C6711 DSP with CCS 2.2. My program uses interrupts to get data from the PCM3003 audio daughtercard and I wish to send data through RTDX in real-ti...

c6711 dsk & adaptive filter problem   [2 Articles]

Hi everyone, I'm a student working on modified Griffith-Jim beamforming for my masters project. I'm implementing this algorithm in TI's c6711 dsk, and ...

Reading right and left channel stereo inputs with C6711DSK and PCM3003 codec.   [2 Articles]

Hello all, I'm new to DSP and this is my first post. Im trying to carry out noise cancellation using the C6711DSK and the PCM. My noise and desired signals are on two sepera...

RTDX with HWI   [3 Articles]

Hi, I am building a program which captures data from the PCM3003 audio card, by means of HWIs, and sends it to a PC, via JTAG, when 512 samples are available. ...

FFT on C6711 DSK & audio daughter card   [2 Articles]

Dear all, I'm trying to implement an FFT on the C6711. I'm using the Audio daughter card TMDX326040A (PCM3003) to send data to the DSK and they are con...