AD535 | BIOS | Booting | Bootloader | C621 | C6211 | C6415 | C671 | C6711 | C6711DSK | C6713 | CCS | Chassaing | COFF | DAT | DM64 | DM642 | DMA | DSK671 | DSK6711 | EDM | EDMA | EMIF | Emulator | EVM | EVM620 | FFT | FIR | GPIO | Halting | HPI | HWI | IDK | JTAG | LDB | LDH | LDW | Linker | LMS | LOG_printf | Matlab | McBSP | MEM_alloc | MIPS | PCI | PCM3003 | Pipeline | Profiling | QDM | Reset | ROM | RTDX | Sampling | SDRAM | Stack | TEB | THS1206 | TMS320C621 | TMS320C6416 | TMS320C6711 | TMS320C6713 | UART | Vector Table | XBUS | XDS560

Fwd: EVM620_PCI _Driver

oops, I forgot to copy c6x group. mikedunn ---------- Forwarded message ---------- From: Michael Dunn Date: Jan 24, 2008 8:25 AM Subject: Re: [c6x] EVM620_PCI _Driver ...

EVM620_PCI _Driver

Hi PPl, I have a problem in installation of the driver for the EVM board 6201 (In PCI mode of Configuration). operating system used: Windows Xp Im not able to run the c...

C6205 hardware boot loader / SDRAM problem   [7 Articles]

All, I am using the eInfochips EVM6205 board to prototype a C6205 embedded system. My system must use the MAP 0 memory map which requires booting from SDRAM loca...

Re: could not locate:..\debug\intr_.asm

Heng Jiang- > EVM6201, when my host program invoked evm6x_hpi_generate_int() > to send HPI interrupt to DSP, in the DSP program the HPI interrup service > func...

can somebody send me a codec example evm 6201??, please!

hi everyone!!   i've problem with evm6201'codec , i've an example , and how i'd could , i'd make it work, but just for a while(one time), i've no experience in ...

File Handlers-- '6201 problem..

Hi C6x ppl, I am using EVM6201, using CCS 2.0, under Windows NT 4. I have a doubt/problem. What determines limit, (if any, besides memory) on files i can op...

Tms320c6201/6701

To create a strange DSP system I must to use all MCBSP on DSK 6711 board. Is possible that the only place where there is the JP1 informations is on the help ? ...

codec problem???

Hi Every 1, i have an interesting pbm. I am working on G.723 coder on C6201. I am reading data from thr port ,processing and sending it back to the port ...

Digital serial data output/input from kits

hi all Is their any way to tranfer(in/out) serial digital data from the DSK6711? I heard that serial digital data lines are avialable from the EVM6201/6701 ...

Re: FW: DSK 6711 can it detect condenser mic input?   [3 Articles]

Seshu- > but the condenser mic works for mic-in of the EVM6201(whose > codec provides the same pre-amp 20dB gain). What level is the signal from the mic? Ca...

C6xxx EVM and TMS320C6701 processor

Hi, I'm using TMS320C6701 EVM Kit with Code Composer Studio 2.0 in Windows 98. In "Code Composer Studio Setup" I use C6xxx EVM emulator for system configuratio...

RE: [2] Looking for TMS320C6x EVM PCI Borad's driver for W indows XP

Craig, Par, Please find below information regarding the Bug# SDSq19226 For those of you who could not get the C6x01 EVM drivers to install on Win 2000, we...

Re:[2] Looking for TMS320C6x EVM PCI Borad's driver for Windows XP

Par, >I have run CCS2.0 with a EVM6201 PCI board under XP. I used the same >driver as for NT4.0/Win2K. > >I originally had it working under NT4.0 and inst...

Re: Looking for TMS320C6x EVM PCI Borad's driver for Windows XP

I have run CCS2.0 with a EVM6201 PCI board under XP. I used the same driver as for NT4.0/Win2K. I originally had it working under NT4.0 and installed Win2k inste...

Profile Point statistics

Dear Friends, I am using EVM6201 and Pentek 4291 DSP boards for measuring the performance of c6X processors. Actually I try DSP operations such as "FFT, FIR, ...

I/O conflict between EVM6201 and Framegraber   [3 Articles]

Hi friends, I am working on a MS project which requires image processing at EVM6201. I am getting the images with a Tekram framegraber board and camera. Both EVM6...

Re: printf

Hello GeForce, I'm using the prinft statement in all my test code and this works fine. This code is run in the simulator, but also with the emulator. I use the...

EVM6201   [3 Articles]

Hi friends, I am a new member of this list. I have recently started to work with EVM6201. I will have aan interface between the host PC and the EVM DSP through ...

Need help using RTDX   [2 Articles]

We are trying to use the RTDX interface on the EVM6201 together with codecomposer studio (NT) 1.0. There are some examples provided by TI but we need some more i...